Park Tool

The BBT-10.2 is a specialty tool for removing and installing crank arm caps on Shimano® Hollowtech® II cranks, including those found on e-bikes. Includes a built-in hook to lift the safety plate found on Hollowtech® II crank arms, speeding crank removal.

Built-in 8mm hex for removing crank bolts. Includes 2 rotating tips (11.3mm and 16.3mm) to remove Ocatlink and ISIS Drive crank arms, and tapered-holed crank arms.

The BBT-9 is used to remove and install external bearing crankset bottom brackets. Fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm.

The Park Tool BBT-16 removes and installs the self-extracting/one-key release caps with a 16 mm hex hole found on SRAM® and RaceFace® cranks. Features investment cast steel construction and includes an 8 mm hex fitting for removing overtightened caps.

Many modern chains use a “master link" (also known as a "quick link" or "power link") that allows the chain to be installed and removed without driving out a rivet. MLP-1.2 Master Link Pliers make removal and replacement of these master links.

Park Tool introduced the bicycle world to the three-way wrench over 40 years ago. Our Y-shaped wrenches fit perfectly in the palm of your hand and provide excellent leverage, making them a favorite of mechanics in bike shops worldwide.

The SP-7 is a professional-quality diagonal/side-cutting pliers with soft-touch dual-density grips. The SP-7's 20 mm cutting surface is perfect for cutting brake housing, zip ties, and anything else that needs to be cut around the shop.

6’’ needle nose pliers with five crimping/grasping areas and a cutting blade. Forged, heat-treated Cr-Mo steel with an invisible spring. Soft-touch dual-density grips.

4mm, 5mm, and 6mm hex set.Wrenches made from industrial tool steel, through hardened and tempered for long life. Chamfered tips for a perfect fit.

The popular FR-5 lockring tool with guide pin pressed into the tool providing stability and preventing the tool from slipping out. Works on Shimano and other cassette lockrings.

This cutter is designed for cutting brake and SIS cables or housings
It has a built in crimper for cable end caps and a forming hole for reforming housing and housing ferrules.

22mm x 1 for most cotterless cranks. Added thread lenght to fit deeper aerodynamic cranks.